Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Yo I had this exact problem. I attached the blower attachment and it was not flat with the level of the extruder. What I did was take a hair dryer on to the blower and warm it up a bit then pushed the piece up into the level i wanted it. Seems to be working fine now after just a slight bend. I also printed my blower at an angle to try to give the little screw holes extra support as the first print I made of it i broke the screw holes right way ><