Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Thank you for this very nice model.
I'm completely new to 3D printing and this was actually the first model I slized myself. The first print wasn't ideal as it had a lot of stringing inside the box, but the mechanism was working just fine. I did some research and tweaked the settings a bit. The second print came out near perfect. So I wanted to share my settings for everyone:
Slizer: Cura 3.6.0
Printer: Creality CR-10S
Material: PLA
Layer Hight: 0.2 mm
Top/Bottom Pattern: Concentric
Bottom Pattern Initial Layer: Concentric
Optimize Wall Printing Order: On
Infill Density 20 %
Infill Pattern: Triangle
Printing Temp: 210°C
Build Plate Temp: 50°C
Enable Retraction: On
Retraction Distance: 6 mm
Retraction Speed: 60 mm/s
Print Speed: 50 mm/s
Travel Speed: 60 mm/s
Combing Mode: Not in Skin
Avoid Printed Parts When Traveling: Off
Z Hop When Retracted: Off
Build Plate Adhesion Type: Skirt
Skirt Line Count: 4
Actual Print Time: 4 hours

Video how to unlock the mechanism: https://youtu.be/oLlPiXsoVfY