Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

The bottom corner STL has a problem. The two bottom corner pieces at the front and the one piece, to some degree at the back right, do not touch the print surface. They're about a mm or so above the print bed. The two hinge pieces at the back left do lay flush with the print surface.

The attached image shows the gap. I've generated the gcode from two different apps, Simplify3D and PrusaControl and but show the same result; those pieces not laying flat with the print bed. This also applies to most of the parts in the doors STL. The top corners and pieces STL is correct and the print preview shows the bottom of all pieces touching the print bed.

I'm just learning 3D printing and modeling and have no idea how to edit this STL to get those pieces to lay flat on the print bed. Any help would be appreciated!