Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Successful print settings using Cura 3.6 and the Select V2 with no modifications:
-rotated 30 degrees ccw about the z-axis to fit the build plate
-matl. = white hatchbox PLA
-set the resolution to "fine" (approx 0.1313 mm layer height)
-initial layer print speed = 15 mm/s
-print speed = 50 mm/s
-density = 100% (there seemed to be no advantage in time or material for a lesser density)
-used the skirt option for base
Total print time took 2:20 min.
I noticed the holes on the first layer were not intact but the resulting part showed no evidence.
See picture for proof.
Thanks for the part!