Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

My current settings for the Ender-3 =
Layer height .13,
Initial layer Height .13
Line width 0.35
5 walls, 5 top layers, 6 bottom layers - The layers can vary depending on what im printing but this is my norm.
10% infill grid pattern - can vary depending on print. always swap to layer view after prep and look at the layers using slide. look for anything that may fail or cause issues without supports added / more infill needed.
fill gaps between wall = no, Print temp 195, bed temp 46 (on glass bed with hairspray).
Flow 98%,
Retraction distance 6mm, retraction speed 56, min travel .6mm,
Print speed 40, travel speed 70, first layer speed 20.