Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

OK, I'm getting there, I've found a place for the screws www.mcmaster.com large lots, but that just means I have to make more. Now I'm trying to cut out the pieces, but I think my laser works differently than yours, or the SVG File is not coming in quite accurately to CorelDraw (the program our ULS 150D Laser requires). I'm cutting the treads and it doesn't look like a toothpick will fit through the holes. I'm wondering if you can give me the outside dimension of a part after it has been cut. The inside diameter of the hole looks like 1.5-1.6mm. the Body Plate in Step 1 is 78mm wide. Do these sound right? It's about 4 hours to cut all of it. I don't want to waste material or time. Thank you! the other pics are just to show you what I've done so far. I had to put tape on the front after cutting to make sure all the tiny pieces didn't fall into the honeycomb cutting bead, so the pics are from the back side.