Thingiverse is currently experiencing issues related to search. We are currently investigating. Thanks for your patience.


MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

My son found this here on Thingiverse and have since purchased the entire design from your page. So far looks super well designed.
I am not using the same printer as you (for using the G-code) and am using Simplify3d for slicing. For the most part I do not have any problems other than on FUS5 there appears to be a Non-manifold edge at a height of 118.2mm (about). It is creating a problem and S3D will not print about one MM at that height because of it leaving a gap. I have not found a work-around as of yet inside S3D.
EDIT: It was suggested to me to use "3D Build" to repair the STL, this has worked.
For now I have cut the body of your G-code and inserted that into my own. Doing a test right now.
One issue I had with that is your code sets the fan speed on nearly every layer. As I have a super powerful fan I cannot run over 50% on this print so I had to remove every M106 command as well.
EDIT: Merging the Gcode files did work as well.

NOTE: The bottom 5mm of FUS5 does not seem very well merged. The tabs on this one piece seem weak or not fused well to the body of the part. Looking at the gcode there is a large gap between the ring holding the tabs on and the shell of the body.