Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

No changes to the enclosure, except I had to do a ton of research on the plexiglass to find the right fit. If you can't find the right thickness, then the support will have to change. I tried online, local hardware stores, local glass stores. I settled on this:
https://www.lowes.com/pd/OPTIX-0-118-in-x-36-in-x-72-in-Clear-Acrylic-Sheet/3140717

More than what I wanted to spend, but because of the size, I have enough to use on the middle shelf or another one if I get a second printer.

I uploaded more pics here so you can get a better look at the space: https://www.thingiverse.com/make:489984
Not a tight fit at all, plenty of space for a light on the side vs the LED strips.

The only thing I edited was the handles to fit magnets I found at home depot; https://www.thingiverse.com/thing:2916725
I did a rush job, so not a perfect fit, not flush, but glued them in

To mount the box below, I had to notch out the back. I took the braces and cable guide from: https://www.thingiverse.com/thing:2685750
I rotated my heat bed to three point, so the wires are pretty tight with the box completely forward, the box sets back just a bit. Still can see the screen fine.
https://www.thingiverse.com/download:4402372
https://www.thingiverse.com/download:4402247

Spool Holder:
https://www.thingiverse.com/thing:2047554

Filament guide:
https://www.thingiverse.com/thing:2114888

Door Handles
Wanhao Lack Triple Stack Enclosure Attack: With Sliding Control Box & Removable Top
TUSH - The Ultimate Spool Holder
Ikea Lack filament guide
Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research