MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate


I love this design, it is so clever, and perfect for indoor/outdoor fun! Thank you for all the time you've put into it.
I've made the 78mm version, and have installed BR1104's in it (just waiting for the FC and ESC to turn up, so it's not tested yet.)

It's all together and motors are installed, although some very minor tweaks were required:

  • The pieces snap together a bit too tight, I had to it push them in a vice which cracked one piece, and I certainly won't be able to replace just one quarter, it'll be all or nothing.
  • I had to drill new mounting holes for the motors to rotate them. They're 2mm round from the old ones
  • I also had to extend the wire exit slot from the motors by 1mm to accomodate the heatshrink coming from the motors. Without doing this the motors wouldn't sit flush with the base. (I guess I could have cut the heatshrink, but didn't want to for risk of breaking wires.

It was printed out of ABS at 0.1mm/0% infill