Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

I made one with a 38" span. It flew good except the wing unexpectedly folded. it may have a glue joint loosen exposing the spars to 100% of the stress.

If you make the wing larger consider a larger vertical stabilizer.

IIRC I used two layers of pla for the fuselage.You might consider more print material in the fuselage on your next one.

since the material is more flexible be careful with the elastic bands deforming and tearing the trailing edge of the wing. I would advise that you don't assemble the wing to the fuselage until you are actually going to fly it.