MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Hi Carletto73,
i have se same problem as blkbaron. I've use your parameters for sclicing with Simplify3D, Cura and Repetier Host. With yours parameters (schell= 1 and infill 3%, the infill make a second outline somtime on the schell (that increase the weight). Wath software are you using to print ( on screenshot it seem to be Repetier but you speak of Cura below) and wath patern for infill?
Thanks a lot
Hi Carletto73,
i have se same problem as blkbaron. I've use your parameters for sclicing with Simplify3D, Cura and Repetier Host. With yours parameters (schell= 1 and infill 3%, the infill make a second outline somtime on the schell (that increase the weight). Wath software are you using to print ( on screenshot it seem to be Repetier but you speak of Cura below) and wath patern for infill?
Thanks a lot