MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
i have fitted this carriage and been using it for several weeks now it has improved print quality dramatically so many thanks for that.
there are only two small items i need to sort, first is has anyone designed a part fan for this carriage if so would it be possible to share the file please.
secondly i have not had the need to add material for the end stop switch as the wires come out that side and are cable tied in place to stop them moving so this activates the switch every time guaranteed but i do need to alter the tool offset which is where i am a little stuck.
i know where to adjust tool offset but which way is plus and which way is minus,so the hot end is approximate 25.4 mm to far to the left so do i nee to make it -25.4mm or 25.4mm in order to move it to the right by this amount i am using simplify 3d .
many thanks again for this great design any advice would be gratefully appreciated