Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Hello jburchm1. here are some pictures - https://drive.google.com/drive/folders/0B1OoBxMaa0WLWFdoX2lKYk5RRmc?usp=sharing

The slip ring was a late addition to the design and the cable routing isn't ideal however hopefully you can see how I did it in the pictures, I routed both the slip ring plus the Stepper wires through the same passage and then connected them inside the nacelle, it can be done but its tight and will require patience. To protect the wires I used this cover designed by another user linked below. I housed the power electronics in the tower out the way and nice and dry, the user in the link below housed the power in the nacelle both will work and its totally up to you.

https://www.youmagine.com/designs/bearing-cover-for-mkii-5-watt-3d-printable-wind-turbine

Let me know how you get on...

Thanks Dan