Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Report as inappropriate

Hi!

Here is the output from ponterface, debug communications.
I resliced using Slic3r and no difference, still locks up.

Yes, I did the PID calibration, that all works fine, I have an amp meter on the PSU, there is plenty of power/amps available.

I also have inductive Z probe, this is my first probe, maybe I disconnect and disable in firmware.

Perhaps output below has clues......

RECV: echo:busy: processing
RECV: echo:busy: processing
RECV: echo:busy: processing
RECV: echo:busy: processing
RECV: echo:busy: processing
RECV: X:120.00 Y:120.00 Z:0.00 E:0.00 Count X: 78643 Y:78643 Z:0
RECV: ok
SENT: M105
RECV: ok T:207.3 /208.0 B:48.2 /48.0 B@:33.45W @:101
SENT: M105
RECV: ok T:207.3 /208.0 B:48.2 /48.0 B@:33.45W @:101
SENT: N4 G1 Z5 F50000
RECV: ok
SENT: N5 M109 S208
103
RECV: T:207.5 /208.0 B:48.2 /48.0 B@:
RECV: 32.44W @:98 W:?

The last SENT: command is not pasting correctly. there is an asterisks between S208 and 103
Can someone please PM me their configuration.h for their printer? Marlin 1.1.0 RC6

In the meantime, I will review settings.