MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Wooofff. Thanks to all of the incredible work by all in the design chain. Prints very well on Rostock V2 max with dual E3d extruders using BondTek filament drivers. Printing on BuildTak. Viki 2 running an Azteeg V3 pro board. Matter Control slicer. 0.4 mm nozzle.
205 degree C Polymax PLA. 5 mm retraction on move and tool change. Retract speed 45 mm/sec. Z lift 0.5mm. Extra length on restart 0.1 mm. Minimum move requiring retraction 1 mm. Minimum extrusion requiring retraction 0.5 mm. No Layer cooling. Layer height 0.2 mm. First layer height 0.3 mm. 3 perimeters. 3 top and bottom layers. 30% infill, triangles. Infill overlap 0.1 mm.
Cleanup tip. After cutting off the leaf tabs the leaves can be freed up if they are sticking by running the thin end of a 6 inch nylon tie between the leaves and the inner and outer shells.
Plug. Polmax PLA is by far the best PLA I have ever used. It is not only strong but is also tough and self lubricating to a tremendous degree.