#######################################################################
# Target Machine:artillery3d Sidewinder X1 (tested with September 2019 model)
# basefiles downloaded from: http://artillery3d.com/en/Content/490193.html
# modified by: rob3dprint@gmail.com
# modified: Dec/2019
# remixed by: FoodFighter (https://www.thingiverse.com/FoodFighter)
# remixed: Feb/2020
# --------------------- Disclaimer -------------------------------
# Use at your own risk!
# There are inherent dangers of upgrading your firmware and config files. We caution you to make sure that you completely understand the potential risks before applying/uploading any of the software to your 3d-Printer
# This Software and Config Files  are provided "as is" without warranty of any kind, either express or implied.
# All information is provided “as is”, with NO guarantees. There is NO warranty that:
# - the software and config file  will be uninterrupted, timely, secure or error-free
# - the software and config file will meet your requirements
# - the results that may be obtained from the use of the software and config file will be effective, accurate or reliable
# - the quality of the software and config files will meet your expectations
# - any errors in the software and config files obtained will be corrected.
#--------------------------------------------------------------------


### robrob: TIP ###
# For upgrading your MKS_TFT copy the following folders/files to the tft card: mks_font, mks_pic, mks_config, mkstft28. Reboot printer with SDCard inserted
# For some of the features, like e.g. LiveAdjustZ and PID Tuning to work you also have to flash the modified Marlin Firmware bundled with this release.
#
# if you have only modified this file (mks_config.txt), e.g. with your own preheat temps,  you can upload it standalone to your SDCard and boot from it. That's faster.



#########  Printer type setting  ##################################

#mainboard firmware setting(marlin:1; repetier:2; smoothie:3)
>cfg_firmware_type:1

#machine setting (Normal:1; Delta:2)
>cfg_machine_type:1

#baud rate (9600:1; 57600:2; 115200:3; 250000:4)
>cfg_baud_rate:4

#multi-language(enable:1, disable:0)
>cfg_multiple_language:0

#languages setting
#(simplified Chinese:1; traditional Chinese:2; English:3; Russian:4; Spanish:5). This configuration is valid when "cfg_multiple_language" is disabled.
>cfg_language_type:3

#extruder number(one:1; dual:2)
>cfg_sprayer_counter:1

#enable heated bed(yes:1; no: 0)
>cfg_custom_bed_flag:1

#the max target temp of extruder and heated bed
>cfg_max_sprayer_temperature:270
>cfg_max_hotbed_temperature:150

#pause position (-1 is invalid; Z-axis is relative position)
>cfg_XPOS:-1
>cfg_YPOS:-1
>cfg_ZADD:10

#-----------------------------------------------------------------------
#########  Advanced Function Option  ##################################

#enable UPS?(yes:1; no:0)
>cfg_have_ups_device:0

#enable power detecting module(mks 220det:1; mks pwc:0)
>cfg_insert_det_module:0

#enable auto off after print finish function (no:0; Yes:1）
>cfg_print_finish_close_Machine:0

#set PB0 signal when use it for sencond nozzle (high level:1; low level:0)
>cfg_PB0_trigger_Level:0

#set PB1 signal (high level:1; low level:0)
>cfg_PB1_trigger_Level:0

#set error range of Z-axis on breakpoints recovery
>cfg_breakpoint_z_error:0.2

#---------------------------------------------------------------------------

#########  Filament Change Function  ##############################

#the speed to extrude filament(mm/min)
>cfg_filament_load_speed:400
#the lenght to extrude filament (mm)
>cfg_filament_load_length:100

#the speed to retract filament(mm/min)
>cfg_filament_unload_speed:2000
#the lenght to retract filament(mm)
>cfg_filament_unload_length:100

#It is the minimum temperature for filament change.
It will auto heat up if the current temp doesn't reach the target.
>cfg_filament_load_limit_temperature:200

#The length of Load filament before unloader filament.
>cfg_unload_retract_length:5

#The speed of load filament  before unloader filament.
>cfg_unload_retract_speed:500

#---------------------------------------------------------------------------

############  Leveling Function  ########################################

#leveling mode(manual:0; auto:1; conceal leveling button:2)
>cfg_leveling_mode:0

#the command of auto leveling (G29 is available for Marlin.While G32 is for  Repetier and Smoothieware)
>cfg_auto_leveling_cmd:G28;G29;

#the point number of manual leveling:(3,4,5 point available)
>cfg_point_number:5

#the coordinates of 5 point on manual leveling
>cfg_point1:50,50
>cfg_point2:250,50
>cfg_point3:250,250
>cfg_point4:50,250
>cfg_point5:150,150

#the travel speed of leveling(mm/min)
>cfg_leveling_z_speed:1500
>cfg_leveling_xy_speed:8000

#---------------------------------------------------------------------------

#############  WIFI Function  ##########################################

#wifi model(MKS WIFI TFT:0;  MKS HLK-WIFI:1)
>cfg_wifi_type:0

#wifi mode(0:sta;1:ap)
>cfg_wifi_mode:1

#wifi name and password
>cfg_wifi_ap_name:Artillery
>cfg_wifi_key_code:12345678

#0:disable cloud service 1:enable cloud service
>cfg_cloud_enable:0
#cloud service adress
>cfg_wifi_cloud_host:www.baizhongyun.cn
#cloud service port
>cfg_cloud_port:10086

#Dynamic access IP
>cfg_ip_dhcp_flag:1

#IP/mask/gateway
>cfg_ip_address:192.168.3.100
>cfg_ip_mask:255.255.255.0
>cfg_ip_gate:192.168.3.1

#--------------------------------------------------------------------------------

############## Function Customization #######################################

#user-defined function1 and 2.(display this button .  disable: 0; enable: 1)
>cfg_function_btn1_display:1


#command of user-defined function
>function_btn1_cmd:M84;

#black M42 P4 S0;M42 P5 S0;M42 P6 S0;
#white M42 P4 S255;M42 P5 S255;M42 P6 S255;
#red M42 P4 S0;M42 P5 S255;M42 P6 S0;
#green M42 P4 S255;M42 P5 S0;M42 P6 S0;
#blue M42 P4 S0;M42 P5 S0;M42 P6 S255;

#set number of  "More" button
>moreitem_pic_cnt:7
#the files are named: bmp_custom1..7
#edit command for 1~7 "More" button, each command must be separated by semicolon
 
#########################################
#Autotuning for nozzle+Bed + Auto-Save
>moreitem_button1_cmd:M42 P4 S0;M42 P5 S255;M42 P6 S0;M106 S127;M303 S220 C8 U1;M42 P4 S255;M107;M42 P5 S0;M42 P6 S0;M500;M42 P4 S0;M42 P5 S255;M42 P6 S0;M106 S127;M303 E-1 S60 C8 U1;M500;M42 P4 S255;M107;M42 P5 S0;M42 P6 S0;

#Manuel Bed Level: Homing, All Motors but Z Off
>moreitem_button2_cmd:M42 P4 S0;M42 P5 S0;M42 P6 S255;G28;G1 Z0;M18 S600;M18 X Y E; M42 P4 S255;M42 P5 S0;M42 P6 S0;

 LiveAdjustZ+
>moreitem_button3_cmd:M290 Z0.025;M42 P4 S255;M42 P5 S0;M42 P6 S0;

#SaveToEEPROM
>moreitem_button4_cmd:M42 P4 S0;M42 P5 S255;M42 P6 S0;M500;G4 S1;M42 P4 S255;M42 P5 S0;M42 P6 S0;

#PreHeat PLA
>moreitem_button5_cmd:M42 P4 S0;M42 P5 S0;M42 P6 S255;M104 S210; M140 S60; G4 P500;M42 P4 S255;M42 P5 S0;M42 P6 S0;

#PreHeat PETG
>moreitem_button6_cmd:M42 P4 S0;M42 P5 S0;M42 P6 S255;M104 S240; M140 S85; G4 P500;M42 P4 S255;M42 P5 S0;M42 P6 S0;

#LiveAdjustZ-
>moreitem_button7_cmd:M290 Z-0.025;M42 P4 S0;M42 P5 S0;M42 P6 S255;
#########################################


#how many "More" button display on screen interface
>morefunc_cnt:5

#RobRob: these buttons are available once a printjob is started
#the files are named: bmp_morefunc1..6
#command setting on button1~6
#########################################
#LightsOut
>morefunc1_cmd:M42 P4 S0;M42 P5 S0;M42 P6 S0;
#Lights On (White)
>morefunc2_cmd:M42 P4 S255;M42 P5 S255;M42 P6 S255;
#LiveAdjustZ+
>morefunc3_cmd:M290 Z0.025;M42 P4 S255;M42 P5 S0;M42 P6 S0;
#LiveAdjustZ-
>morefunc4_cmd:M290 Z-0.025;M42 P4 S0;M42 P5 S0;M42 P6 S255;
#SaveToEEPROM
>morefunc5_cmd:M42 P4 S0;M42 P5 S255;M42 P6 S0;M500;G4 S1;M42 P4 S255;M42 P5 S0;M42 P6 S0;
#not used currently
>morefunc6_cmd:G28;
#########################################
#---------------------------------------------------------------------------------
##### Display Customization(button and logo customized see User's Manual) #######

#the color of screen background
>cfg_background_color:0x000000

#the color of title text
>cfg_title_color:0xFFFFFF

#the color of temperature,fan,(etc) background
>cfg_state_background_color:0x000000

#the color of temprature,fan,(etc) text
>cfg_state_text_color:0xFFFFFF

#the color of file button
>cfg_filename_background_color:0x000000

#the color of file text
>cfg_filename_color:0xFFFFFF

#the color of background in printing
>cfg_printingstat_word_background_color:0x000000

#the color of text in printing status
>cfg_printingstat_word_color:0xFFFFFF

#3D effects setting (disable: 0; enable: 1)
>cfg_BUTTON_3D_effects:0

#The screen is flipped 180°(0: no flip, 1: flip)
>cfg_OVERTURN_180:0

#shield the function of detection power (0:no shield ,1:shield)
>cfg_disable_PWR_det:0

#shield the function of detection filament (0:no shield ,1:shield)
>cfg_disable_MT_det:0

#Whether to support the function of dual extruder single nozzle.(0: disable, 1: enable)
#the extruder number need set to dual.
>cfg_single_nozzle:0

#For the M110 command plus check, the version of Marlin 1.0.2 and below is set to 1, and the other versions are set to 0.
>cfg_M110_add_checkSum:0

#Enable function of display error message. (no:0; Yes:1）
>cfg_display_eeror_message:1

#-----------------------------------------------------------------------