my name is Marcel and I'm a mechatronical engineer.
I started with 3D printing in February 2017 with an Anet A8. Before that, I have read so much about 3D printing and finally decided to buy my first printer :). Only a few months later I upgrade this Anet to a ramps 1.4 board with a bowden setup.
Currently I am about to build a Hypercube Evolution with a 400x400x400mm building room.
I Am A…Engineer, Maker
Tools I Use…
Design Programs: Inventor, CATIA, Fusion 360, MeshMixer
3D Design Skill Level