Have been printing and designing stuff for 3D printing for a few years now, I use Simplify3D to slice as I have found it to be the most reliable.
I use Fusion360 really badly, however I can pretty much find anything I want to do on YouTube so that isn't holding me back.
I have a heavily modified Hictop 3DP-11 with Dual Extrusion, running a Bowden set-up housed in an Ikea Lack table, one nozzle is stainless steel. The heated bed is mains powered.
I also have a Tronxy X5SA with E3D Titan Aero, Duet 2 Wifi, BL Touch (all genuine) and quite a few other changes, pretty much unrecognisable from the original.
Also have a CTC Chinese MakerBot clone which I hated so replaced the controller with an MKS Gen 1.4 and I am currently making this into a usable printer.
Have also got a Raspberry Pi 3B+ with Octoprint on it, used on a CR-10 for a while but really bought it for the Hictop, not got around to putting it on yet.
I Am A…Engineer, Maker
Tools I Use…
Printers: hictop pursa i3 , CR-10 , Tronxy X5SA
Design Programs: Fusion 360
3D Design Skill Level