I've been working with 3D since the 1990s and 3D printing since 2013. I built a Rostock MAX delta arm printer from a kit and I've been figuring out how to upgrade it ever since. In 2015, I upgraded to the excellent Rostock MAX METAL from TrickLaser, and I will be building more of them for my fleet. I also do commercial work for clients who need 3D objects printed, and optionally designed. In addition to the paid work and the free objects I release here, I'd also like to branch out into "paid open source," in which someone pays me to create a design and then release it under an open source license.
I also do programming. I implemented a device driver for Adafruit's WS2812 LEDs that runs on the Raspberry Pi. Before this, it was necessary to use an Arduino or some other external chip. It was erroneously believed that the Pi, running Linux, could not time the signal generation accurately enough to be reliable. I knew that the Pi's DMA controller should be up to the job, and sure enough, it is!
I Am A…Engineer, Designer, Maker
Tools I Use…
Printers: Trick Laser Rostock MAX METAL
Design Programs: Sketchup, Blender
3D Design Skill Level